PDA

View Full Version : Trouble with latest eagle image ?

oldtam
12-07-09, 18:28
I used to use Nablio darkstar II image but had a little trouble conecting to server (for emu,s and plugins)But had no trouble sharing my card.
Since I loaded Eagle image v 0. I have not been able to share my Art card. It says in cccam info that it is offline, I emailed a mate and he confirmed that he could see all my other shares, but not my own card. I have tried cccam 2.1.1 + newcs 166 and 2.1.1 full. Both give the same result
Is this a bug with the eagle v image ? Or is there a solution (work around) ?
Thanks in advance for any advice.
Pawnee
12-07-09, 18:56
That is strange as it should work without modification, I am not trying to insult you here so don't take this the wrong way, but have you the card in the slot whit the chip to the front and facing down?
oldtam
12-07-09, 19:36
That is strange as it should work without modification, I am not trying to insult you here so don't take this the wrong way, but have you the card in the slot whit the chip to the front and facing down?

Yes card is in ok. I can watch these channels on my own box ok without a share so I know the card is working.
Pawnee
12-07-09, 19:42
Ok sounds like something in your config so

Can you post and example of an f line from your config without user and password of course
oldtam
12-07-09, 19:52
ok sounds like something in your config so

can you post and example of an f line from your config without user and password of course

f: ***** *** 3 0 0 { 0:0:2 }
oldtam
13-07-09, 12:05
So no ideas then ?
Pawnee
13-07-09, 13:06
The f line looks ok,

Access to you server card up to 3 hops, and can reshare 2 hops further.

Try this back up your cccam.cfg,
From the control panel download cccam full,
Do not set up any sharing entries,
Active CCcam and check if it is reading the card then.
oldtam
13-07-09, 14:25
The f line looks ok,

Access to you server card up to 3 hops, and can reshare 2 hops further.

Try this back up your cccam.cfg,
From the control panel download cccam full,
Do not set up any sharing entries,
Active CCcam and check if it is reading the card then.

Sorry for the delay,
Did as you say.Yes I can read the card myself, which was always the case anyway. Problem is peer cant see it.
What if I pm,ed you a c-line, see if you can see it ?
oldtam
13-07-09, 18:45
All sorted now Thanks to Pawnee. A great help.
Pawnee
13-07-09, 18:48
Np glad you got it working :cheers2: