View Full Version : Eagle and JSC
I have a JSC card and whenever I switch to JSC Sports I get the picture for 2-3 mins and then I lose it. I then check my CCCam and it has closed and needs to be rebooted to restart and then the cycle begins again.
Has anyone any ideas as to what could be happening.
Is your card for Hotbird, or Nilesat?
Is your card 0603 or 0604?
did you add any extra data to the cccam.config?
Also delete all the key files for JSC in /var/keys
If that does not work try adding the following to your cccam.config and delete any similar entries.
B : /dev/sci0 04
CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SMARTCARD CLOCK FREQUENCY : /dev/sci0 6000000
The card is on Hotbird but not sure if 0603 or 0604. I only have my c and f lines on the cccam.cfg and added the info below. I have deleted the softcam and constant.cw files but the picture still freezes and CCcam stops after a couple of minutes. I have put the card into my AZbox and it works with no issues.
On the Eagle I deleted my c and f lines on the cccam.cfg, put the card in and it worked with no freezes. Could there be a conflict with one of my c and f lines?
Cloud be a conflict, check for extra spaces or no spaces where there should be.
Start by adding one line at a time and see if you get a conflict.
vBulletin® v3.7.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.