Tokala
31-12-08, 14:59
V-Box Eagle Setup
--------------------------------------------------------------------------------
This guide will show you how to configure your Eagle Receiver with a V-box.
First make sure in the motor config you are set at many sats via diseqc motor.
First select a channel on your Eagle for 42 East move the dish to say 42 East manually with the v box remote.
Once the picture clears and your sure you have the correct orbital position store it on the v-box remote and right down the position the v-box stores to.
Example 42e Position 1
Repeat the above until you have covered the Arc.Then turn off the vbox.
Note to users User that already use a V-box
In your case you may be able to skip the above just write down your stored positions you already have in the v-box for each orbital position.
Now in the Eagle motor config deselect the gotox setting and add the 42E position which will be 420 then click save.
When the Eagle asks for a position number enter the v-box position number you saved for that orbital position.
Eample 42E Position 1
Repeat until you have covered the Arc then reboot the Eagle and vbox and the dish will move automatic when a different sat is selected.
Ferret
--------------------------------------------------------------------------------
This guide will show you how to configure your Eagle Receiver with a V-box.
First make sure in the motor config you are set at many sats via diseqc motor.
First select a channel on your Eagle for 42 East move the dish to say 42 East manually with the v box remote.
Once the picture clears and your sure you have the correct orbital position store it on the v-box remote and right down the position the v-box stores to.
Example 42e Position 1
Repeat the above until you have covered the Arc.Then turn off the vbox.
Note to users User that already use a V-box
In your case you may be able to skip the above just write down your stored positions you already have in the v-box for each orbital position.
Now in the Eagle motor config deselect the gotox setting and add the 42E position which will be 420 then click save.
When the Eagle asks for a position number enter the v-box position number you saved for that orbital position.
Eample 42E Position 1
Repeat until you have covered the Arc then reboot the Eagle and vbox and the dish will move automatic when a different sat is selected.
Ferret