flashing dm 500 via browser???

[kemestri]

could anyone please post instructions on how to flash dm500 via the web browser?

i have searched for this info withour luck. info for 7020 etc but not 500 which of course has no display.

thanks in advance

[Pawnee]

The dm500 cannot be flashed using the web browser, the fastest method for the DM500 is using flashwizard.

Pawnee

[HaCKaMaC]

And the safest is DreamUP.

[Tokala]

Method for flashing with Dreamup with Null modem cable.


1 Before making any connections from your Pc to the DM switch off both your DM and PC.

2 Start universal DreamUp and make sure the Use Network option is unticked.

3 Now select your serial com port and then click connect, a status massage will be displayed saying the connections prepared now switch on the Dreambox.Do this by either switching back on the power at the plug socket or putting the power cord back into the power socket at the rear of your DM.

4 Now select Flash and point DreamUp to were you have your unrared image and click open, the upload will now start. This will take around 12 minutes.

5 After the flash has completed click disconnect and power down then power up the box.

6 Time to get sat in front of the TV! As your box boots you’ll see the image loading Screen come up maybe a couple of times.

7 At the Pal Screen Select Pal or the system your TV uses and then press the green button on your remote to save.

8 Select your language and press the ok button.

9 Select your time zone and press the green button to save.

10 You’ll now see the Diseqc Setup menu and have 3 options to choose from
No Diseqc for a single LNB Setup.
Simple For a the setup of 2 Lnb’s
Complex for Diseqc 1.2 or Usuals/Goto X

11 If you want to use usuals keeps the goto x box ticked and enter your Longitude and latitude and press the green button to save.

12 Now select Auto Transponder Scan. This will scan all available transponders till a valid one is found. When found press green to scan. When the scan is complete press ok.At this point you can now scan another satellite with a press of the green button or red not to.

13 Click exit and select a channel free to air to view.Now press the menu button-option5-reboot now, this will save your settings.
That’s the flash and initial setup complete.


Tokala

[Tokala]

See this guide for Flashwizard, for the Eagle but the same applies to the DM500

http://geronimosden.com/showthread.php?t=900

[fantom007gr]

do you mean distance flashing the box?
becouse this is posible to change software to a box in another city like the box of your friend.