Incubus Camd manually

[Pawnee]

This tutorial will help You to create and use Incubus Camd manually.

First of all we need this tools: FTP Client ( FileZilla it's free ), SSH Client ( Putty also it's free ).

Also You will need archive Incubus files for AzBox HD receivers which You can find attached to this
Post.

Now, when you are finished with downloading of Incubus Camd v0.55 which contains files for AzBox
HD, extract that archive and You will find 3 files : incubusCamd.conf , incubusCamd.prio ,
incubusCamd.sigma .

Now, connect on your Receiver by FTP and enter in directory /EMU/OpenXCAS . Inside of directory
OpenXCAS create new directory with name incubusCamd.

Enter inside of incubusCamd directory and upload inside of that directory 3 files from Incubus Camd
archive ( incubusCamd.conf , incubusCamd.prio , incubusCamd.sigma ).

Give CHMOD ( Permission ) to this 3 Files on 755

Now in file module.seq which you can find inside of OpenXCAS directory, normally You have to put
name of EMU which will be active, but this for some reason dont work for Incubus Camd, so every
time when You want to start Your incubus you have to do it manually, by connecting on Receiver by
SSH Client ( Putty ) for now.

To run Incubus Camd manually follow this steps :

Use Putty to connect on Your Receiver.
Username: root
Password: azbox

When you are loged in navigate to /EMU/OpenXCAS/incubusCamd with this command: cd
/EMU/OpenXCAS/incubusCamd .

When you are inside of incubusCamd directory ( to be sure that You are inside of incubusCamd
directory type command : pwd , or type command : ls -a ).

Now to run incubusCamd manually, You have to type this command: ./incubusCamd and press enter.

But before running of incubusCamd be sure that You have edited file incubusCamd.conf which
contains data for Your card server type, in this case Gbox or CCcam server.

The Important lines are :

[Prov:FF00] # this provider is a stand-in for all providers not declared------------------
#
# For example i choose to use gbox protocol on all other provider.
#
#card_server_url_0=gbox://
card_server_url_0=gbox://xxxxxx.myftp.org:user port:user pass@xxxxx.dyndns.org:server
port:server pass

[Servers]
#card_server_url_0=cccam://<username>:<password>@<hostname>:<port>
#card_server_url_1=gbox://<localhost>:<localport>:<password>@<peer_address>:<peer_port>:<pee
r_pass>
card_server_url_0=gbox://xxxxxx.myftp.org:user port:user pass@xxxxx.dyndns.org:server
port:server pass

And, after You edit and owervrite existing file on Your AzBox receiver You are free to start using
Incubus Camd.